(478) 390-3221
All Articlesdon the electrician

DIY Guide: Troubleshooting and Fixing a Tripped Circuit Breaker

Don Fullman2025-11-17

DIY Guide: Troubleshooting and (2025-11-17): Want to become an electrician? Learn from the best. In this in-depth guide, Don, an experienced electrician, shares his knowledge on electrical work.

When the power suddenly goes out in part of your home while the rest remains lit, you're probably dealing with a tripped circuit breaker. This guide will help you solve this common electrical issue in a safe and practical manner.

What You Will Need

  • Flashlight: This will help you see clearly if the power outage is extensive.

  • Rubber Gloves and Rubber-soled Shoes: These are essential for safety to insulate you from electric charges.

  • Non-contact Voltage Tester: This tool allows you to detect whether an electric charge is present without touching the wire.

Estimated Time and Costs

The process of troubleshooting and fixing a tripped circuit breaker usually takes around 30 minutes to an hour. As for the cost, if you already have the necessary tools, the process should be virtually free. However, if you need to buy a non-contact voltage tester, you may need to spend around $15 to $30.

Steps to Troubleshoot and Fix a Tripped Circuit Breaker

Step 1: Identify the Problem

Before you start, make sure the problem is indeed a tripped circuit breaker. If only part of your house has lost power, it's likely a tripped breaker. However, if your whole house is without power, you might be dealing with a power outage.

Step 2: Locate Your Circuit Breaker Panel

Your circuit breaker panel is usually located in a utility area, such as a basement or a garage. Use your flashlight if the area is dark.

Step 3: Identify the Tripped Breaker

The tripped breaker is usually in the "off" position or in a position that's different from the others. It could also be labeled with a red or orange color.

Step 4: Reset the Breaker

Before you reset the breaker, put on your rubber gloves and rubber-soled shoes. Then, use your non-contact voltage tester to confirm whether there's an electric charge. If it's safe, push the breaker to the "off" position and then to the "on" position.

Step 5: Check If Power Is Restored

Go back to the part of your house that lost power and check if the power is back. If not, you may need to consult a professional as the problem could be more serious.

Safety Tips

  • Never touch a circuit breaker or any other electrical component with wet hands or while standing on a wet surface.

  • Always use a non-contact voltage tester before touching any electrical component.

  • Do not attempt to fix a tripped breaker if you're unsure or uncomfortable. It's always safer to consult a professional.

References

For more information about circuit breakers and home electrical systems, you can refer to the following resources:

  • How Energy-Efficient Light Bulbs Compare with Traditional Incandescents - energy.gov

  • Electrical Safety - nfpa.org

Keep Reading

Ready to get wired?

Call Don directly, straight answers, fair pricing, fast scheduling.

(478) 390-3221