(478) 390-3221
All Articlesdon the electrician

DIY Guide: Fixing a Common Circuit Breaker Problem

Don Fullman2025-08-23

DIY Guide: Fixing a Common Circuit (2025-08-23): Gain expert electrical insights from Don the Electrician. Learn how to fix common household electrical problems safely and efficiently.

Are you experiencing frequent power outages in your home? When you go to check the breaker box, you find that a circuit breaker keeps tripping, causing the power to go off in certain parts of your house. This is a common problem many homeowners face. But don't worry, you don't need to be Don the electrician to fix this issue. With some basic safety measures and the right tools, you can solve this problem yourself.

Understanding Circuit Breakers

A circuit breaker is a safety device installed in your house to protect your electrical circuits from damage caused by excess current. When there is an overload or a short circuit, the breaker "trips" or shuts off, cutting the power to that circuit to prevent damage and fires. Therefore, a tripping circuit breaker is a sign that it's doing its job. However, if it's happening often, it could indicate a problem.

Why Does a Circuit Breaker Trip?

  • Overloaded Circuit: This happens when too many electrical appliances are operating on the same circuit at the same time.

  • Short Circuit: This is a much more dangerous problem, caused when a "hot" wire (black) touches another hot wire or a "neutral" wire (white). It can also occur if there is a fault in an electrical appliance.

  • Ground Fault: This is similar to a short circuit, but it happens when a hot wire touches a ground wire (bare copper or green wire).

Tools Needed

  • Screwdriver

  • Wire stripper

  • Voltmeter

  • Replacement circuit breaker (if necessary)

Estimated Time and Cost

It should take you about an hour to fix an overloaded circuit or replace a faulty circuit breaker. The only cost you might incur is if you need to buy a replacement circuit breaker, which usually costs between $15 and $40.

Step-by-Step Guide

Before you begin, please ensure you turn off the main power to your house. Safety should always come first when dealing with electrical systems.

Step 1: Identify the Problem

First, you need to identify why your breaker is tripping. If it's an overload, you can solve the problem by unplugging some appliances and spreading them out on different circuits. If the breaker still trips after you've unplugged all appliances, it's likely either a short circuit or a ground fault.

Step 2: Check for Short Circuits or Ground Faults

If you suspect a short circuit or ground fault, you'll need to check your outlets and appliances for signs of blackening or burning. If you find one, unplug all appliances from that outlet, and try resetting the breaker. If it doesn't trip, the problem is likely with one of the appliances. If it does trip, the problem could be a short circuit in your house's wiring, and you might need to replace the breaker.

If you don't find any signs of burning, you can use a voltmeter to check for short circuits. Set the voltmeter to the highest AC voltage scale available. Connect the red lead to each black wire entering the circuit breaker, and the black lead to the metal box. If the meter indicates zero, that means there's no current flowing through the breaker, and it needs to be replaced.

Step 3: Replace the Breaker

Replacing a breaker is relatively simple. First, remove the panel cover. Then, disconnect the wire from the faulty breaker and remove the breaker from the panel. Attach the wire to the new breaker, and snap it into place. Then, replace the panel cover, turn the main power back on, and reset the breaker.

Safety Tips

  • Always turn off the main power before you start working on your breaker box.

  • Always use insulated tools.

  • Never touch the service lugs in the main breaker, they are always live even when the main power is off.

  • Always replace a breaker with one of the same type and amperage.

Conclusion

Fixing a circuit breaker is a relatively simple task that you can do yourself with the right tools and safety precautions. However, if you're not comfortable working with electricity, or if the problem persists after you've replaced the breaker, you should consult with a professional electrician.

For more information on circuit breakers, check out this guide by the U.S. Department of Energy.

Keep Reading

Ready to get wired?

Call Don directly, straight answers, fair pricing, fast scheduling.

(478) 390-3221