(478) 390-3221
All Articlesdon the electrician

A Comprehensive Guide to Fixing a Tripped Circuit Breaker

Don Fullman2025-11-29

Guide to Fixing a Tripped Circuit (2025-11-29): Get hands-on, easy-to-follow instructions from Don the Electrician, an expert with years of experience, on how to address common electrical issues. Learn.

As an electrician, I often receive calls from homeowners about a common problem - a tripped circuit breaker. This issue can cause your lights to go out or prevent your appliances from working properly. Luckily, it's a problem most people can fix without professional help, and thats what this guide is for.

What Causes a Circuit Breaker to Trip?

A circuit breaker may trip due to several reasons:

  • Overload: When the amount of current flowing through the circuit exceeds its capacity.

  • Short Circuit: When a hot wire comes into contact with a neutral wire.

  • Ground Fault: When a hot wire touches the ground wire or the side of a metal outlet box.

What You Will Need

Before we start with the process, ensure you have the following tools:

  • Flashlight

  • Insulated gloves

  • Non-contact voltage tester (optional)

Estimated Time and Costs

This is a quick DIY task that should take no more than 15 minutes. As for the cost, if you already have the necessary tools, this fix is free!

Step-by-Step Guide to Resetting a Tripped Circuit Breaker

Step 1: Identify the Tripped Breaker

Using your flashlight, inspect the circuit breakers in your electrical panel. The tripped breaker will typically be in the middle position between "ON" and "OFF."

Step 2: Turn Off the Tripped Breaker

Once identified, flip the tripped breaker to the "OFF" position. This step is important to reset it properly.

Step 3: Reset the Breaker

After switching off the breaker, flip it back to the "ON" position. If it stays on, you've successfully reset it. If it trips again immediately, its a sign of a more serious problem, and you should call a professional electrician.

Step 4: Test Your Appliances

Now that you've reset the breaker, test the appliances that were affected. They should be working fine now.

Safety Tips

  • Wear Insulated Gloves: Always wear insulated gloves while working with your electrical panel to avoid shocks.

  • Use a Flashlight: Never try to work on your electrical panel in the dark. Use a flashlight to see clearly.

  • Call a Professional if Unsure: If you're unsure about any step in this process or if the breaker keeps tripping, don't hesitate to call a professional.

Conclusion

Resetting a tripped circuit breaker is a simple task that can save you from unnecessary frustration. However, always remember to prioritize safety when working with electricity. If the problem persists, it's time to call a professional.

For more information about circuit breakers and how they work, check out this article from the U.S. Department of Energy.

Keep Reading

Ready to get wired?

Call Don directly, straight answers, fair pricing, fast scheduling.

(478) 390-3221