DIY Guide to Fixing a Tripped Circuit Breaker
DIY Guide to Fixing a Tripped (2025-09-14): Discover the basics of home electrical work with Don the Electrician. Learn how to handle common electrical issues safely and effectively. No.
Have you ever experienced a sudden power outage in certain parts of your house, only to find out that the rest of the neighborhood still has power? This is likely due to a tripped circuit breaker. But don't worry, Don the Electrician is here to guide you through the process of fixing it yourself with this detailed, practical DIY guide.
Understanding Circuit Breakers
Circuit breakers are designed to protect your homes electrical system against damage caused by excess current from an overload or short circuit. When it detects a problem, the circuit breaker "trips," or shuts off the flow of electricity to the affected area.
Tools Needed
Flashlight
Insulated rubber gloves
Estimated Time
This task typically takes less than 15 minutes to complete.
Costs
If the circuit breaker is faulty and needs replacement, a new one generally costs around $20 to $40.
Steps to Fix a Tripped Circuit Breaker
Step 1: Identify the Problem
First, you need to identify the circuit that has tripped. Go to your electrical panel, usually located in a utility area such as a basement or garage. The tripped breaker will be in the "off" position or in a middle position between "on" and "off".
Step 2: Turn Off All Sensitive Electronics
Before resetting the breaker, make sure to turn off all sensitive electronics such as computers, televisions, and gaming consoles. This will protect them from a power surge when the power is restored.
Step 3: Reset the Circuit Breaker
Put on your insulated rubber gloves for safety. Then, firmly push the breaker to the "off" position, then flip it back to the "on" position. If the breaker stays in the "on" position, power should be restored.
Step 4: Check Your Outlets
Walk through your home and check the outlets in the affected area. If power has not been restored, or if the breaker trips again, you may have a short circuit or a problem with an appliance, and you should consult a professional electrician.
Troubleshooting Tips
If the Circuit Breaker Continues to Trip
If the breaker keeps tripping, you likely have an overload or short circuit. An overload occurs when you have too many electronics running at the same time. Try unplugging some devices and resetting the breaker. If this doesn't work, you may have a short circuit, which can be caused by a wiring issue or a faulty appliance.
If the Circuit Breaker Won't Reset
If the breaker won't stay in the "on" position, it may be faulty and need replacement.
Safety Tips
Never touch a circuit breaker with wet hands or while standing in water.
Always use insulated rubber gloves when working with your electrical panel.
If you're not comfortable with the task, consult a professional electrician.
Further Reading
For more information on circuit breakers and home electrical systems, check out these resources:
How to Save Electricity by Energy.gov
Breaker Box Safety: How to Connect a New Circuit by This Old House
